
19” Fridge-Top Equipment Racks
Skip the custom design and improvisation. Nord Cryo’s professional 19” fridge-top equipment racks are ready to integrate with your setup and are based on our experience with real-world customer needs. Electrically insulated rails give you flexibility in how you implement grounding, while standard configurations and variations cover most common requirements. Additional customization is available on request. Approximate lead time: 3 weeks.
Keep your measurement and control electronics organized, accessible, and close to your experiment. These heavy-duty two-post 19” equipment racks provide a convenient mounting solution for electronic instrumentation directly on compatible Bluefors® LD and XLD dilution refrigerators.
Designed with flexibility in mind, the rack can be mounted either to the refrigerator’s aluminum frame or directly to its anti-vibration plates. Available in single- and dual-rack configurations, with heights ranging from 10U to 20U, it offers a versatile solution for integrating a wide range of electronic equipment while maintaining a clean, professional installation that complements the refrigerator’s design.

Typical Applications
The 19” fridge-top rack is ideal for housing the electronic equipment commonly used in quantum research and low-temperature experiments. Typical applications include:
- Inline amplifier mounting: Place an amplifier close to the fridge for best performance, boosting the signal before routing it to a full-height 19” rack elsewhere.
- Patch panels: Keep cables tidy and organized without strain between the fridge and the measurement rack, protecting vacuum feedthroughs and transitioning to lower-loss, long-distance cables.
- Measurement and control electronics: Lock-in amplifiers, signal generators, and measurement controllers.
- Quantum computing and qubit control: Microwave sources, RF equipment, control electronics, and signal distribution systems as close as possible to minimize cable loss.
- Data acquisition and instrumentation: Digitizers, data acquisition units, and measurement interfaces.
- Signal conditioning and distribution: Amplifiers, filters, switches, attenuators, and other signal-processing equipment before the signal enters the fridge.
By bringing essential electronics together in one accessible location, the rack helps create a more organized experimental setup, simplifies cable management, and makes efficient use of the space around the refrigerator.
This rack is designed for two-post rack mounting and is not suitable for equipment intended for four-post mounting, including long or heavy servers and magnet power supplies. Mounting such equipment may overload the rack and cause damage to the equipment.
Grounding
Grounding is a key topic for sensitive electronics. All racks in this range have insulation between the rails and the frame. This means any grounding connection you choose to make is fully in your control. Optionally, install Nord Cryo’s grounding bus bar attachment for aluminum profiles to provide a low-resistance star-point ground. This makes the rack compatible with isolated grounding schemes, strongly bonded schemes, or star-point grounding, as required.

Compatibility
These racks are designed to be compatible with typical Bluefors LD and XLD dilution refrigerators, as well as many other systems.
One rack design supports mounting either to the refrigerator’s aluminum profiles or directly to its anti-vibration plates. We specify two or four M12 bolts to secure it in place. The mounting pattern provides flexibility in positioning, and when used with standard 45 mm profiles, the rack can be mounted nearly anywhere required.
LD vibration plate

LD frame profiles

XLD anti-vibration plate

XLD frame profiles

Configuration Options
- Single or dual rack configuration.
- Rack heights from 10U to 20U.
Available heights: 10U, 12U, 14U, 16U, 18U, and 20U.


Features
- Standard 19” rack rails for mounting a wide range of electronic equipment (IEC 60297).
- 9.5 mm mounting hole size for standard cage nuts.
- 450 mm clear opening.
- Heavy-duty steel rack rails.
- Aluminum profile construction designed to complement the Bluefors refrigerator.
- Adjustable rails support 10” or 8” wide rack configurations.
- Based on a common aluminum profile system, allowing your own additions or customization.


Recommended Companion Products
- Grounding Bus Bar kit for aluminum rails.
- 12.7 mm tubular ground braid.
- SMA Patch Panels.
- Modular Patch Panels.
Included in the Box
- 2 or 4 × M12 bolts and washers for securing the rack to the anti-vibration plate.
- 4 × M8 bolts and washers for fastening to aluminum profiles.
- 4 × M8 square nuts for use with 45 mm series aluminum profiles. 2 or 3 × 19” rack posts.
- Rack lower plate.
- Installation instructions.
Delivery: Supplied flat-packed; some assembly required.
Ordering Information
Ordering code:
NC2001-[S/D]-[H]U
Where:
- S – Single rack.
- D – Dual rack.
- H – Rack height in rack units (U).
Available heights: 10U, 12U, 14U, 16U, 18U, and 20U.
NC2001-S-10U Aluminum-profile 19-inch rack, 10U
NC2001-S-12U Aluminum-profile 19-inch rack, 12U
NC2001-S-14U Aluminum-profile 19-inch rack, 14U
NC2001-S-16U Aluminum-profile 19-inch rack, 16U
NC2001-S-18U Aluminum-profile 19-inch rack, 18U
NC2001-S-20U Aluminum-profile 19-inch rack, 20U
NC2001-D-10U Dual aluminum-profile 19-inch rack, 10U
NC2001-D-12U Dual aluminum-profile 19-inch rack, 12U
NC2001-D-14U Dual aluminum-profile 19-inch rack, 14U
NC2001-D-16U Dual aluminum-profile 19-inch rack, 16U
NC2001-D-18U Dual aluminum-profile 19-inch rack, 18U
NC2001-D-20U Dual aluminum-profile 19-inch rack, 20U
Grounding Bar
Heavy-duty copper bus bar with M6 through-holes and M6 threaded holes for attaching copper braid on a 44.5 mm pattern, ideal for use with 19” rack-mounted equipment.
4 mm thick copper. Nylon 66 mounted to aluminum.
Specifications:
- 11 kVDC dielectric strength
- 10,000 MΩ @ 500 VDC
- −20 °C to +80 °C
- RoHS and REACH compliance
- Compatible with 45 mm profiles
- 6U tall
Ordering code NC2002
There are no options for this product.

Example installation

12.7 mm Tubular Ground Braid
- Flexible copper braid for grounding and shielding.
- Pure metal with no fillers.
- Can be cut to length as needed.
- Braid can be opened up to push bolts through for fastening.
Ordering code
- NC2003-[L]m
- L – length in meters from 5 to 30. Available only in whole multiples of 5 metres.
- Provided as a continuous length of braid.
Disclaimer
Nord Cryo is not affiliated with or endorsed by Bluefors. This is a third-party aftermarket product.